There are three ways to upload photos/videos to RICOH360 Cloud.

*RAW data cannot be uploaded to RICOH360 Cloud; only JPEG format images can be uploaded.
*For videos, you can upload videos in MP4 format with a file size of 1GB or less.

1. Uploading photos on a device (app) to RICOH360 Cloud
2. Automatically uploading photos in the camera to RICOH360 Cloud (*supported models: X, Z1)
3. Uploading PC photos to RICOH360 Cloud

Uploading photos on a device (App) to RICOH360 Cloud

Upload the photos stored on the device (App) to RICOH360 Cloud.

1. Open the RICOH360 App and log in.
2. Tap  at the bottom of the screen
3. Tap Device among THETA / Device / Cloud at the top of the screen
4. Tap Select
5. Tap the thumbnail of the photos you wish to upload
   *Multiple selections are possible. However, if the selected photos contain RAW data, they cannot be uploaded. Please select only JPEG data, not including RAW data.
6. Tap Upload to Cloud in the menu that pops up at the bottom of the screen

The upload is complete when the animation displayed in the center of the thumbnail disappears.

The thumbnail of the photos uploaded to RICOH360 Cloud will display an in the lower right corner.

Automatically uploading photos in the camera to RICOH360 Cloud (*supported models: X, Z1)

For instructions on how to set up automatic uploads for THETA X and Z1, please refer to the page for connecting each model.

If the following conditions are met, the photos in the THETA will be uploaded to the RICOH360 Cloud without having to go through the RICOH360 App on your smartphone.

• Within range of the wireless LAN router's signal set up for client mode connection;
  
  • Turn on the power of the THETA main unit.
  • Set the wireless mode of the THETA main unit to client mode.

In addition, when you have finished setting up automatic uploads after shooting, the default setting for “Automatic upload after shooting (a function that automatically changes the THETA's wireless mode from access point mode to client mode)” is ON. Therefore, if you use the RICOH360 App to take remote photos of the THETA within range of the wireless LAN router set for client mode connection, and then exit shooting mode, the uploading of photos to the RICOH360 Cloud will begin immediately.

If Automatic Upload after shooting is turned off, the THETA's wireless mode will remain in access point mode even after the RICOH360 App exits shooting mode, and the THETA will not upload images to the RICOH360 Cloud until the THETA's wireless mode is switched to client mode. Therefore, until the wireless mode of the THETA unit is switched to client mode, the uploading of photos from the THETA unit to the RICOH360 Cloud will not be performed.

If the Automatic Upload after shooting function is turned off, transfer the photos from the THETA to the device (app) and then follow the procedure described above for Uploading photos on a device (App) to the RICOH360 Cloud.

The procedure to turn on/off the Automatic Upload after shooting function is as follows.

1. Access the RICOH360 App and log in
2. Tap
3. Select THETA X or THETA Z1 from the list of registered cameras.
4. Tap Auto Upload under "Cloud Sync Configuration".
5.  "Auto Upload after shooting" toggle to turn it off and on

For the procedure to set the wireless mode of the THETA main unit to client mode, please refer to here（THETA X / THETA Z1）.

Uploading PC photos to RICOH360 Cloud

360-degree photos stored on your PC can be uploaded to the RICOH360 Cloud using the Web App.

1. Go to app2.ricoh360.com/login and log in
2. Click on the Team Name and select the Team
3. You can upload by doing any of the following
   
   • Click Add on the right side of the screen, select the file(s) of photos you wish to upload and click "Open".
     
   • Drag the file(s) you wish to upload and drop them on the RICOH360 App window.

When the message "Upload Complete." is displayed, the upload is complete.